What Accessories can be used with Hilti Total Stations?

Hilti provides several accessories that can be used to assist you in your layout, which this article breaks down, categorically.

Prisms & Targets

For more information on distances that can be measured with specific prisms, please see this article.

Several accessories are available to assist with securing the tool and performing layout with prism tracking.

POA 36 Tripod (main tripod for securing the total station)
POA 52 Prism Pole (main prism pole for holding and tracking a POA 25 or POA 20 prism)
POA 75 Bipod (stabilizing and leveling sticks for the POA 52 prism pole)
POA 29 Short Rod (a substitute for the POA 52 Prism Pole - much smaller for tight layout applications)
POA 106 Wall Mount (designed to secure the total station to a column or corner)
POA 67 Rolling Cart (rolling tripod that can secure a plumb laser and prism on top, great for interior applications)
POA 66 Rolling Cart Laser Adapter (plumb laser designed to be used with the POA 27 rolling cart and the POA 25 or POA 20 prism)
POA 70 2-Point Plumb Laser (plumb laser designed to be mounted to the top of the POA 52 prism pole with a POA 25 or POA 20)

These additional accessories could be helpful as well, depending on your applications or needs.

POA 37 Bubble Adapter (a separate leveling bubble with two male ends that can be placed on the bottom of the POA 52 prism rod, for example).
POA 36 Ball Knob (a separate leveling bubble with one female end that can be placed at the top of the POA 52 prism rod, for example).
POAW 46 Center Punch (a stake for the bottom of the POA 52 Prism rod that provides a spring punch for quick marking of points in concrete layout applications).
POA 31 Calibration Plate (the calibration plate needed for field calibrations for the PLT 300 only. Note, the PLT 400 performs its own field calibrations, see this article).
POA 10 base plate + POA 16 prism (an anchor bolt drilling layout layout accessory - accurately find your drilling location and drill straight through the center of the POA 16 prism - for HCW anchors or max 12mm diameter).
POAW 71 Tribrach - a tribrach that fits the PLT 400 or POS 150/180 tools if you prefer to have a manually adjustable knob for leveling

PLC 600 - the core tablet controller for the head units
POA 125 - tablet holder that will connect to a prism rod
POA 130 - hand and neck strap that can bee used to hold the PLC 600
POA 129 - stylus pen for the PLC 600 tablet
POA 40 - multi-bay charger for the PLC 600 batteries
POA 41 - PLC 600 battery
POA 134 - Tablet connection end of the charging cord for the PLC 600
POA 110-115 - Power source connection end of the charging cord for the PLC 600 (country specific)